Actisense PRO-NDC-1E NMEA 0183 Multiplexer, 5 In / 2 Out, Ethernet
Actisense PRO-NDC-1E NMEA 0183 Multiplexer, 5 In / 2 Out, Ethernet
Actisense
SKU:PRO-NDC-1E
Delivery status: On order
Couldn't load pickup availability
Prices in EUR. Worldwide delivery, also to vessels. Payment, delivery and returns →
The PRO-NDC-1E is a rugged, type-approved NMEA 0183 multiplexer. It merges data from up to five isolated sources into two isolated outputs. You can filter at sentence level, set baud rates per port and switch automatically between redundant sources, so each instrument gets only the data it needs.
It suits commercial vessels and yachts that have more NMEA 0183 talkers than a chart plotter, ECDIS or PC can accept directly. Setup is done in a web browser. The built-in Ethernet port streams NMEA 0183 data to navigation software over the ship's network, and a bi-directional serial port is available as well.
- 5 isolated NMEA 0183 inputs and 2 ISO-Drive isolated outputs, Hi-Pot tested to 1000 V
- Bi-directional RS422/RS232 serial port (115200 bps)
- 10/100 Ethernet (RJ45): configuration, firmware updates and NMEA 0183 over TCP/UDP
- Power supply: 9–35 V DC, 150 mA max at 12 V, with reverse polarity and transient protection
- Pluggable 5.08 mm screw terminals and diagnostic LEDs
- Approvals: RINA type approval; EMC to IEC 60945, DNVGL-CG-0339 and IACS UR E10; IP40
- 316 stainless steel housing, 139 × 129 × 26.5 mm; bulkhead or DIN rail mounting
- Description
The PRO-NDC-1E is a rugged, type-approved NMEA 0183 multiplexer. It merges data from up to five isolated sources into two isolated outputs. You can filter at sentence level, set baud rates per port and switch automatically between redundant sources, so each instrument gets only the data it needs.
It suits commercial vessels and yachts that have more NMEA 0183 talkers than a chart plotter, ECDIS or PC can accept directly. Setup is done in a web browser. The built-in Ethernet port streams NMEA 0183 data to navigation software over the ship's network, and a bi-directional serial port is available as well.
- 5 isolated NMEA 0183 inputs and 2 ISO-Drive isolated outputs, Hi-Pot tested to 1000 V
- Bi-directional RS422/RS232 serial port (115200 bps)
- 10/100 Ethernet (RJ45): configuration, firmware updates and NMEA 0183 over TCP/UDP
- Power supply: 9–35 V DC, 150 mA max at 12 V, with reverse polarity and transient protection
- Pluggable 5.08 mm screw terminals and diagnostic LEDs
- Approvals: RINA type approval; EMC to IEC 60945, DNVGL-CG-0339 and IACS UR E10; IP40
- 316 stainless steel housing, 139 × 129 × 26.5 mm; bulkhead or DIN rail mounting
Share
