{"product_id":"actisense-emu-1-engine-monitoring-unit","title":"Actisense EMU-1 Engine Monitoring Unit, Analogue to NMEA 2000","description":"\u003cp\u003eThe EMU-1 converts the signals from a boat's analogue engine senders and gauges into NMEA 2000 data. Older engines can then show RPM, temperatures, pressures, fuel level, tilt\/trim and alarms on a modern chart plotter or multifunction display, and the existing gauges can stay in place.\u003c\/p\u003e\u003cp\u003eOne unit can monitor up to two engines. It is a cost-effective way to bring legacy inboard or outboard engines onto an NMEA 2000 network. It works on 12 V and 24 V systems. Initial setup is done with an Actisense NGX-1 PC interface and the free Actisense Toolkit software.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInputs: 6 analogue gauge inputs, 4 alarm inputs and 2 tacho (RPM) inputs\u003c\/li\u003e\n\u003cli\u003eTacho inputs work with ignition coil, alternator W\/R\/AC, hall effect and inductive senders\u003c\/li\u003e\n\u003cli\u003eLogs engine hours for 2 engines in non-volatile memory\u003c\/li\u003e\n\u003cli\u003ePower supply: 9–35 V DC (under 25 mA typical at 12 V), with reverse polarity and load dump protection\u003c\/li\u003e\n\u003cli\u003eNMEA 2000 port: M12 male A-coded, galvanically isolated, LEN 1\u003c\/li\u003e\n\u003cli\u003eApprovals: NMEA 2000 certified, EMC to EN 60945; IP65\u003c\/li\u003e\n\u003cli\u003ePolycarbonate housing, 127 × 106 × 48 mm; panel mounting with stainless screws included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55838889050449,"sku":"EMU-1-BAS","price":465.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0859\/6871\/6113\/files\/EMU-1.png?v=1794886894","url":"https:\/\/www.smartmarineshop.com\/products\/actisense-emu-1-engine-monitoring-unit","provider":"Smart Marine","version":"1.0","type":"link"}